Description

Specification
– 1 riser, 2 sections
– Column Dia.meter: 70mm, 60mm
– Finish: Chrome Plated Steel Column, Aluminum Leg
– Loading Weight: 100kg (220lbs)
– Weight: 31.55kg (63.1lbs)
– Closed Length: 127.5cm (50.2′)
– Minimum Operating Height: 108cm (42.52"’)
– Maximum Height: 172cm (67.7")
– Footprint Dia.meter: 120cm (47.2")
– Tube Dia.: 30x30mm
– Stand Top: 28mm Receiver With Wind Brace Bracket
– Included Caster Set Dia 152mm (6")
– With Detachable Ratcheted Crank Handle
127.5cm
50.2"
172cm
67.7"
108cm
42.52"
31.55kg
63.1lbs
120cm
47.2"
">
100kg
220lbs
28mm Receiver With Wind Brace Bracket
KC-160C
(Included)
The two-section heavy-duty hand-cranked stand has a load capacity of up to 100kg and a minimum working height of only 108cm, making it easy to store equipment. With a spread diameter of only 106cm, it is especially suitable for Layer truss paltform. The overall structure is composed of iron telescopic tubes, aluminum alloy columns and foot tubes. The head has a 28mm female socket with a fixed ring around it. The hand-cranked mechanism has a gear plate, and the ratchet handle can be inserted and rotated according to the arrow instructions to adjust the height. The ergonomic large handle provides comfort and makes it easier to apply force, and it also has an anti-backlash device to prevent equipment from falling suddenly and causing danger. Each telescopic tube has a maximum extension marking line to avoid exceeding the safe extension height. The handle is detachable and can be stored in the storage slot on the upper seat when not in use, to prevent damage to the handle and hand-cranked mechanism during transportation. The upper seat storage slot has a safety latch design to prevent the handle from accidentally falling out. The upper seat is equipped with a level gauge to facilitate confirmation of the levelness of the stand. The lower seat has dual handles for easy folding of the stand, with 30x30mm square foot tubes to ensure the strength and stability of the stand. It comes with 6" brake casters KC-160C for easy movement of the stand. The stand is assembled with stainless steel screws and nuts to ensure strength and prevent rust.